Hazwoper 40 Hour  Packages
 
PKG 3: 40 HR HAZWOPER + The Clean Water Act  
PKG 4: 40 HR HAZWOPER + RCRA: What the Law Requires

HAZWOPER
40 HOUR PACKAGES
Package 1: 40 Hour HAZWOPER + OSHA 10 Hour Construction Industry Outreach Course -   50 HOURS
This package is part of our Oil Spill Clean Up series designed to provide personnel with the relevant training and certifications that may be needed to participate in the clean up efforts.  This package consists of the 40 Hour HAZWOPER Course and the 10 Hour Construction Industry Outreach Course.  No longer available
--------------------------------------------------------------------------------
40 Hour HAZWOPER: This course covers broad issues pertaining to the hazard recognition at work sites. OSHA has developed the HAZWOPER program to protect the workers working at hazardous sites and devised extensive regulations to ensure their safety and health. This course, while identifying different types of hazards, also suggests possible precautions and protective measures to reduce or eliminate hazards at the work place.
HAZWOPER 40 Hour is required for employees working on a project consisting of Uncontrolled Hazardous Waste Operation mandated by the Government. This course is specifically designed for workers who are involved in clean-up operations, voluntary clean-up operations, emergency response operations, and storage, disposal, or treatment of hazardous substances or uncontrolled hazardous waste sites. Topics include protection against hazardous chemicals, elimination of hazardous chemicals, safety of workers and the environment and OSHA regulations. This course covers topics included in 29 CFR 1910.120.

Note: Workers must have 40 hrs of initial training before they may enter the site and at least three days of actual field experience under a trained, seasoned supervisor. **The online course meets the standard requirement of 40 hrs of initial training. The three days field experience under a trained, experienced supervisor is the responsibility of the student employer or potential employer.
--------------------------------------------------------------------------------
The 10-hour Construction Industry Outreach Training Program is intended to provide entry level construction workers general awareness on recognizing and preventing hazards on a construction site. OSHA recommends Outreach Training Program courses as an orientation to occupational safety and health for workers covered by OSHA 29 CFR 1926. Workers must receive additional training, when required by OSHA standards, on the specific hazards of the job. Upon successful completion of the course, participants will receive an OSHA 10-Hour Construction Outreach DOL course completion card within 4-8 weeks.


Package 2: 40 Hour HAZWOPER + OSHA 10 Hour General Industry Outreach Course  -  50 HOURS
Package Description:  This package is part of our Oil Spill Clean Up series designed to provide personnel with the relevant training and certifications that may be needed to participate in the cleanup efforts.  This package consists of the 40 Hour HAZWOPER Course and the 10 Hour General Industry Outreach Course.  Students will receive a certificate of completion for both the 40 Hour Hazwoper Course and the 10 Hour General Industry Outreach Course.  Students will also receive a Department of Labor card within 4-8 weeks for successful completion of the 10 Hour General Industry Outreach Course.  No longer available


Package 3: 40 Hour HAZWOPER + The Clean Water Act  - 41.5 HOURS
This package is part of our Oil Spill Clean Up series designed to provide personnel with the relevant training and certifications that may be needed to participate in the clean\up efforts.  This package consists of the 40 Hour HAZWOPER Course and The Clean Water Act course.
--------------------------------------------------------------------------------
40 Hour HAZWOPER: This course covers broad issues pertaining to the hazard recognition at work sites. OSHA has developed the HAZWOPER program to protect the workers working at hazardous sites and devised extensive regulations to ensure their safety and health. This course, while identifying different types of hazards, also suggests possible precautions and protective measures to reduce or eliminate hazards at the work place.
HAZWOPER 40 Hour is required for employees working on a project consisting of Uncontrolled Hazardous Waste Operation mandated by the Government.
This course is specifically designed for workers who are involved in clean-up operations, voluntary clean-up operations, emergency response operations, and storage, disposal, or treatment of hazardous substances or uncontrolled hazardous waste sites. Topics include protection against hazardous chemicals, elimination of hazardous chemicals, safety of workers and the environment and OSHA regulations. This course covers topics included in 29 CFR 1910.120.

Note: Workers must have 40 hrs of initial training before they may enter the site and at least three days of actual field experience under a trained, seasoned supervisor. **The online course meets the standard requirement of 40 hrs of initial training. The three days field experience under a trained, experienced supervisor is the responsibility of the student employer or potential employer.
--------------------------------------------------------------------------------
The Clean Air Act describes the legislative history regarding the reduction of atmospheric pollution. The United States Congress first passed the Air Pollution Control Act of 1955,then the Clean Air Act in 1963, followed by amendments in 1966, the Clean Air Act Extension in 1970,and further amendments in 1977 and 1990.
This course discusses the goals and importance of the Clean Air Act through its legislative history. Amendments have been implemented to these Acts, especially the 1990 Amendments which are covered in great detail in this course.
This course also covers how the Clean Air Act is designed to protect people and how well that goal has been accomplished. In addition, the course describes the purpose and requirements of the New Source Review (NSR) permitting program and the Title V permit program. The course ends with the Clear Skies Legislation which was proposed to reduce power plant emissions of sulfur dioxide (SO2), nitrogen oxides (NOX), and mercury.


Package 4: 40 Hour HAZWOPER + RCRA: What the Law Requires   - 44 HOURS
This package is part of our Oil Spill Clean Up series designed to provide personnel with the relevant training and certifications that may be needed to participate in the cleanup efforts.  This package consists of the 40 Hour HAZWOPER Course and RCRA: What the Law Requires Course.
--------------------------------------------------------------------------------
40 Hour HAZWOPER: This course covers broad issues pertaining to the hazard recognition at work sites. OSHA has developed the HAZWOPER program to protect the workers working at hazardous sites and devised extensive regulations to ensure their safety and health. This course, while identifying different types of hazards, also suggests possible precautions and protective measures to reduce or eliminate hazards at the work place.
HAZWOPER 40 Hour is required for employees working on a project consisting of Uncontrolled Hazardous Waste Operation mandated by the Government.
This course is specifically designed for workers who are involved in clean-up operations, voluntary clean-up operations, emergency response operations, and storage, disposal, or treatment of hazardous substances or uncontrolled hazardous waste sites. Topics include protection against hazardous chemicals, elimination of hazardous chemicals, safety of workers and the environment and OSHA regulations. This course covers topics included in 29 CFR 1910.120.
Note: Workers must have 40 hrs of initial training before they may enter the site and at least three days of actual field experience under a trained, seasoned supervisor. **The online course meets the standard requirement of 40 hrs of initial training. The three days field experience under a trained, experienced supervisor is the responsibility of the student employer or potential employer.
--------------------------------------------------------------------------------
Course Description: RCRA What the Law Requires
This course explains the history of the Resource Conservation and Recovery Act (RCRA), its structure and its key elements that provide the framework for the U.S. Environmental Protection Agency's (EPA) comprehensive waste management program. The course discusses the specific requirements of various types of facilities that treat, store, transport or dispose of hazardous waste.




Summary of the Clean Water Act
This package is part of our Oil Spill Clean Up series designed to provide personnel with the relevant training and certifications that may be needed to participate in the clean\up efforts.  This package consists of the 40 Hour HAZWOPER Course and The Clean Water Act course.

The Clean Air Act describes the legislative history regarding the reduction of atmospheric pollution. The United States Congress first passed the Air Pollution Control Act of 1955,then the Clean Air Act in 1963, followed by amendments in 1966, the Clean Air Act Extension in 1970,and further amendments in 1977 and 1990.

This course discusses the goals and importance of the Clean Air Act through its legislative history. Amendments have been implemented to these Acts, especially the 1990 Amendments which are covered in great detail in this course.

This course also covers how the Clean Air Act is designed to protect people and how well that goal has been accomplished. In addition, the course describes the purpose and requirements of the New Source Review (NSR) permitting program and the Title V permit program. The course ends with the Clear Skies Legislation which was proposed to reduce power plant emissions of sulfur dioxide (SO2), nitrogen oxides (NOX), and mercury.

Introduction to the Clean Water Act
The Clean Water Act (CWA) is the cornerstone of surface water quality protection in the United States. (The Act does not deal directly with ground water nor with water quantity issues.) The statute employs a variety of regulatory and nonregulatory tools to sharply reduce direct pollutant discharges into waterways, finance municipal wastewater treatment facilities, and manage polluted runoff. These tools are employed to achieve the broader goal of restoring and maintaining the chemical, physical, and biological integrity of the nation's waters so that they can support "the protection and propagation of fish, shellfish, and wildlife and recreation in and on the water."

For many years following the passage of CWA in 1972, EPA, states, and Indian tribes focused mainly on the chemical aspects of the "integrity" goal. During the last decade, however, more attention has been given to physical and biological integrity. Also, in the early decades of the Act's implementation, efforts focused on regulating discharges from traditional "point source" facilities, such as municipal sewage plants and industrial facilities, with little attention paid to runoff from streets, construction sites, farms, and other "wet-weather" sources.

Starting in the late 1980s, efforts to address polluted runoff have increased significantly. For "nonpoint" runoff, voluntary programs, including cost-sharing with landowners are the key tool. For "wet weather point sources" like urban storm sewer systems and construction sites, a regulatory approach is being employed.

Evolution of CWA programs over the last decade has also included something of a shift from a program-by-program, source-by-source, pollutant-by-pollutant approach to more holistic watershed-based strategies. Under the watershed approach equal emphasis is placed on protecting healthy waters and restoring impaired ones. A full array of issues are addressed, not just those subject to CWA regulatory authority. Involvement of stakeholder groups in the development and implementation of strategies for achieving and maintaining state water quality and other environmental goals is another hallmark of this approach.

CWA: The Big Picture
Brief Overview of Key CWA Elements
First, water quality standards (WQS) consistent with the statutory goals of the CWA must be established. Then waterbodies are monitored to determine whether the WQS are met.

If all WQS are met, then antidegradation policies and programs are employed to keep the water quality at acceptable levels. Ambient monitoring is also needed to ensure that this is the case.

If the waterbody is not meeting WQS, a strategy for meeting these standards must be developed. The most common type of strategy is the development of a Total Maximum Daily Load (TMDL). TMDLs determine what level of pollutant load would be consistent with meeting WQS. TMDLs also allocate acceptable loads among sources of the relevant pollutants.

Necessary reductions in pollutant loading are achieved by implementing strategies authorized by the CWA, along with any other tools available from federal, state, and local governments and nongovernmental organizations. Key CWA tools include the following:

NPDES permit program
Covers point sources of pollution discharging into a surface waterbody.
Section 319
Addresses nonpoint sources of pollution, such as most farming and forestry operations, largely through grants.
Section 404
Regulates the placement of dredged or fill materials into wetlands and other Waters of the United States.
Section 401
Requires federal agencies to obtain certification from the state, territory, or Indian tribes before issuing permits that would result in increased pollutant loads to a waterbody. The certification is issued only if such increased loads would not cause or contribute to exceedances of water quality standards.

State Revolving Funds (SRF)
Provides large amounts of money in the form of loans for municipal point sources, nonpoint sources, and other activities.
After implementation of these strategies, ambient conditions are again measured and compared to ambient water quality standards. If standards are now met, only occasional monitoring is needed. If standards are still not being met, then a revised strategy is developed and implemented, followed by more ambient monitoring. This iterative process must be repeated until standards are met.

The Resource Conservation and Recovery Act (RCRA]
RCRA, enacted in 1976, is the principal Federal law in the United States governing the disposal of solid waste and hazardous waste
History and Goals
Congress enacted RCRA to address the increasing problems the nation faced from its growing volume of municipal and industrial waste. RCRA, which amended the Solid Waste Disposal Act of 1965, set national goals for:

Protecting human health and the environment from the potential hazards of waste disposal.
Conserving energy and natural resources.
Reducing the amount of waste generated.
Ensuring that wastes are managed in an environmentally sound manner.
Implementation

EPA waste management regulations are codified at 40 C.F.R. pts. 239-282. Regulations regarding management of hazardous waste begins at 40 C.F.R. pt. 260. As noted below, most states have enacted laws and promulgated regulations that are at least as stringent as the federal regulations. Furthermore, the statute authorizes states to carry out many of the functions of RCRA through their own hazardous waste programs (and state laws), if such programs have been approved (authorized) by the EPA

Here at Online SchoolRoom we believe we have all the courses and packages to meet your HAZWOPER training needs.  Whether you require our 40 hour course, our 24 hour course or just the 8 hour refresher - you'll find it here.  We also have information you can browse concerning OSHA Regulations and Oil Spill Response. In addition we list HAZWOPER requirements and all the courses for hazmat training.   If you are interested in the 1st responder courses, we have that too.  All of our courses satisfy requirements for OSHA Hazwoper Certification. If you can't find what you want, check out our hazwoper sitemap. You can also read about us and some frequently asked questions about our hazwoper certification training.  Free downloads available.





Hazwoper 40 hour  packages including OSHA 10 hour construction, 10 hour general industry, the clean water act and RCRA - What the law requires





Hazwoper 40 hour  packages including OSHA 10 hour construction, 10 hour general industry, the clean water act and RCRA - What the law requires

$400  $360
$425  $383
*  HAZWOPER / Hazmat courses at 10% off.  Use code HAZSPECIAL at checkout and click on "Update Cart".
X